THUNDER POWER 6 CELL CHARGER WITH BALANCER TP610C

Thunder Power RC has released the TP610C, their newest LiPo, A123, NiCd/MH and PB battery charger. The TP 610C charger can charge 1 to 6 LiPo and A123 cells, 1-14 NiCd and NiMH cells, and 6-12V Pb (Lead Acid) batteries. The Thunder Power TP-610C can charge, balance, discharge and cycle batteries and report back full data. The TP610 charger is capable of up to 10 amps (80 watts total) when charging. Using the TP 610 charger to cycle your battery packs will improve their performance, and the TP-610 charger's built-in balancer will extend the life of your lithium packs!

Includes

TP610C Charger

Alligator clip power supply leads (attached, see picture)

BL-2 Connector (Balancer multi-adapter. Thunder Power and generic balance adapter plugs)

TP-610C Balance Charger Specifications

Max Charge Rate: 10A

LiPo and A123 Cells: 1-6

NiCd and NiMH Cells: 1-14

PB Batteries: 6-12V

Power supply sold separately

Recommended Power supply: 12V car battery or 11-16V DC power supply capable of supplying 10 Amps (example: RipMax Pro-Peak) TP-610C Balance Charger Features

Chargers LiPo, A123, NiCD, NiMH, PB

Discharges

Balances

Cycles

Thunder Power TP-610C Charger Technical

Specifications

Input Power: 11-16V DC 10Amp at maximum charge rate Memory profile: 25Memory for each Battery type Charge battery type: LiPoly/NiMH/NiCd/Pb/A123 Charge voltage and cells:

LiPoly battery: 1 - 6 cells

CC to CV change voltage: 4.1BV/cell

Full Charge Voltage 4.2 V/Cell

NiMh, NiCd Battery: 1 - 14 cells

Pb(SLA) battery: 6V/12V/24V

A123 Battery: 1 - 6 cells

CC to CV change voltage: 3.0V /Cell

Full charge voltage: 3.65 V/Cell

Charge Current: 0.2.5 A, 10A

Charge control type Lipoly/Al23:CC/CV

Charge NiCd/NiMH: constant current - delta peak

Charge/discharge cycles: 9 cycles

Discharge rate: 50mA - 1 Amp

Discharge capacity: 7 Watt (Max 1A)

Capacity display: O-9999mAh

Timeout limit: 2-10 hour (User selectable)

Display Tolerance: 0.5%

Display Type: Backlit 2 x 16 dot LCD

Charge maximum output 80 Watt

Output Charge Terminal: 4mm standard banana jack

Input wire: 16 AWG silicon Wire with attached alligator clips

Size: 118 x 85 x 28 mm (4.65 x 3.4 x 1.1 in) Weight: 205g (9.4oz)